- [產品]-->鋼領
產品推薦
產品分類
聯系方式
- 聯系人:俞盛
- 郵 箱:
- 地 址:無錫西門外楊灣
- 手 機:13901512631
- 電 話:0510-85577875
- 傳 真:0510-85579972
- 網 址:http://www.wxxrfp.com
鋼領
發布時間:2012-06-09
連體鋼領
鋼領底座
精鍍硬鉻鋼領
·特性:
1.采用特殊電鍍工藝,在鋼領表面鍍上一層均勻、密致的硬鉻層,造成與鋼絲圈表面的異相摩擦,減少粘連磨損所造成的早期衰退現象,從而大幅度提高鋼領使用壽命。
2.鋼領表面經過精密拋光,有較高的光潔度,上車走熟期較短。
·Features:
1. Even and compact chrome layer covered at the surface of the ring by special plating process causes out-of-phase friction against the suface of the ring traverler ,which allows long service life resulting from the reduction of the early rust which the wear and tear causes.
2. Ultra-precision polishing process on the ring leads to high surface fineness ,which allows short period to smooth running.
·全新材料;采用優質軸承鋼鋼材制造,比普通20鋼內部組織結構緊密、均勻,熱處理變形量小,材質性能穩定。
· 優良的使用性能,表面采用高科技手段,鍍有自潤滑耐磨層,降低了鋼令與鋼絲圈之間的摩擦系數,上車走熟期極短
· 表面經特殊工藝拋光后鍛造度極低。紡紗性能極為穩定。斷頭少,毛羽少,紡紗質量穩定期較長。
·在確保紗線質量穩定的前提下,使用壽命為原來傳統光面鋼領壽命的2-3倍。
New material:The ring is made of high quality bearing steel.Compared with the common No.20 steel, its internal structur is compact and uniform, featuring in little deflection og heat treatment and stable material performance.
Excellent persormance;Self-lubrication wearable material coated on the surface og the ring by higg-tech process reduces the friction paameter betwen the ring and the ring traveler,which allows short period to smooth running.
Low roughness resulting from special surface polishing process alows stable spinning,low end breakage and low hairiness.
On the permise of the stable good quality, the service life of the ring is 2 to 3 times than that of the traditional one.
潤滑耐磨鋼領
自潤滑耐磨鋼領 Lubricate Wear-resisting Ring SUPER QUALITY SUPER LIFE
·用途:
我廠生產的PG型棉紡鋼領,各種規格已成系列。專供環錠細紗機和捻線機上使用。適合紡純棉,化纖,以及各種纖維的混紡紗、線。PG型鋼領上的鋼絲圈最高線速度可達38米/秒。由于鋼領表面采用了高科技處理技術使鋼領具有自潤滑耐磨性能,特別適用于棉紡行業優質、高產、低耗生產。受到中外客商的一致好評。
·Application:
Series PG alloy rings for the cotton spinning are specially provided for the ring frame and ring twisting frame.They are suitable for cotton,chemical fiber,and various blends. The surface speed of the ringtraveler is up to 38m/s. High-tech surface treatment on the ring enable it to have good wear-resistance with self-lubricating performance,which allows high quality, high efficiency ,and low energy consumption.
錫鷗牌“鈦合金鋼領”
錫鷗的牌鈦合金鋼領
采用高級鈦合金材料研制而成。內部晶粒結構緊密、細致。熱處理性能更穩定,變形量極小。
優良的使用性能:
·表面采用高科技復合鍍工藝,鍍上極薄一層具有自潤滑作用的耐磨物質,并滲入鋼領表面。上車走熟期極短。
·鋼領與鋼絲圈接觸面屬于異相摩擦,因此,不易發生粘連磨損,避免鋼領跑道發生早期衰退現象,壽命與傳統光面鋼領相比可延長至5--7倍。
·卓越的表面處理工藝,使鋼領表面幾乎永不生銹。
·錫鷗牌鈦合金鋼領材質極為耐磨,因此,磨損量極微。在翻改紡紗品種時(指中、細支紗)不需拆下,必要時可在車上用柔軟織物(或回絲)對跑道進行擦拭清理一次,并換上相應重量的(最好是同型號的)鋼絲圈即可進行試紡。
·本鋼領適合紡織任何纖維及各種支紗,對鋼絲圈的選配無特殊要求,能使紡紗斷頭降低,毛羽減少。質量長期穩定在較好的水平上。
·該鋼領質量差異小,為減少細紗錠差打下良好的基礎。
The ring is made of high-grade Ti alloy with compact structure of the crystal grain, which allows stable heat treatment performance and little deflection.
Excellent performance:
The surface of the ring id coated with a paper-thin layer of selt-lubrication wearable material by high-etcg plating process, which allows short period to smooth running.
Out-of-phase friction between the ring and the ring trabeler allows long service life resulting from the reduction of the early rust which the wear and tear causes.Its service life is extended 5 to 7 times than that of the traditional ring.]
Advanced surface treatment process allows stainless.
XiOu Ti alloy ring with featrues of approved wear resistance makes it unnecessary to change ring when yarn counts changed.Clean the ring inside flange with soft fabric or cotton waste when it is necessary, and the replace the corresponding ring traveler, the dame type is recommended.
The ring is suitable for any fiber and all counts yarns without any special requirement for the selection of the ring traveler.Low end breakage and little hairines allow stable good quality.
High quality ring is a help to reduce the spindle discrepancy of the ring frame.